High Voltage Disconnector for Surge Arrester

• Customization: Available
• Type: Signal Type Arrester
• Structure: Zinc Oxide Arrester
• Model NO.: 25-70
• Installation: Parallel Arrester
• Application: AC/DC System
• Size: Small
• Operation Voltage: High Voltage
• Shape: Gyro Type
• Material: ZnO
• Certification: ISO9001
• Brand: Haivol
• Polymeric Housed: Three Pahse
• Zinc Oxide: Outdoor
• Transport Package: Cartons
• Specification: IEC, ANSI, IEEE
• Trademark: HAIVOL
• Origin: China
• HS Code: 85354000
• Production Capacity: 30, 000PCS/Month

Product Description

As a special accessory of the surge arrester, the disconnector is used in series connection with the surge arrester.The purpose is to use the power frequency short-circuit current to make the disconnector act when the surge arrester fails abnormally, so that the grounding termination of the disconnector is automatically disconnected, and the arrester is out of operation to prevent further expansion of the accident,and gives the visibility of the faulty surge arrester, which is convenient for maintenance personnel and finds faults for maintenance and replacement. When the lightning arrester is in normal working state, the disconnector does not act and has a low impedance, which does not affect the original working state of the system and the lightning arrester. The protection features ensure uninterrupted power supply, so that the surge arrester truly meets the requirements of "maintenance-free" use. In foreign countries, such as Europe and the United States, Japan, Southeast Asia and other countries and regions, the distribution type surge arrester, power station type surge arrester and line type surge arresters operating in the power grid have generally used disconnectors. According to the principle of use and performance, the disconnector is divided into a thermal melt disconnector and thermal explosion disconnector. The thermal melt disconnector utilizes the short-circuit current flowing through the failed surge arrester to fuse the alloy fuse (or solder) in the disconnector to achieve the purpose of disconnection. The arc is generated in the device, and the thermal explosion element is detonated to achieve the purpose of separation.

Outstanding advantages:

1. Wide operating current range

It can be disconnected not only under large power frequency fault current (>50A), but also under small fault current (50mA).

2. The speed of disconnection is fast

It can be matched with the reclosing function of the circuit breaker, not only for various voltage levels and various types of surge arresters, but also for different grounding systems (neutral grounding and ungrounding systems).

3. High performance of impulse withstand

No action under 2ms square wave and 4/10μs high current impact.

4. High mechanical strength and good sealing performance 

It can be used with lightning arresters below 36KV, and can also be used with lightning arresters of 36~220KV.

5. Easy to install and replace

The threaded external interface is reliable and convenient to connect with the surge arrester in series connection, and the replacement is extremely convenient.

 

Time versus current characteristics
Current(A)	0.05	0.5	2	20	200	800
Time(S)	300 - 400	50 - 70	4 - 6	0.4 - 0.5	0.03 - 0.04	0.008 - 0.015

 

Impulse current withstand performance
Model	TLB-400	TLB-800	Remark
2mS Long duration current impulse withstand(A)	400	800	no action
4/10μS High current impulse withstand(kV)	100	100

Method of installation

Surge arresters with voltage levels below 36KV are installed with insulating brackets. The surge arrester is fixed with insulating bracket, and the disconnector is installed on the lower terminal of the surge arrester. The grounding wire is made of braided soft copper wire with a length of about 3000mm to ensure that the surge arrester body has enough insulation distance after separation.