Outdoor Cold Shrinkable Power Cable Termination and Joint Accessories

Product Description

Cable Joint Kits (Cold & Heat Shrinkable Cable Accessories)
 
Heat shrinkable cable accessories
Size of condutor:"0":10-16mm2
                 "1":20-50mm2
                 "2":70-120mm2
                 "3":150-240mm2
                 "4":300-500mm2
cable cores: from 1C to 5C
Voltage grade:"1";1kV,"11":11kV
              "24"24kV,"36":33-36kV
Cable type: Y-cross linked polyethyene
power cable "XLPE";
paper insulation cable "PILC"
usage rang:outdoor termination;
indoor termination; straight through joint
 
 
Cold shrinkable cable accessories
Size of condutor:"1":20-50mm2
              "2":70-120mm2
              "3":150-240mm2
               "4":300-500mm2
cable cores: from 1C to 5C
Voltage grade:"1";1kV,"11":11kV
              "24";24kV,"36":33-36kV
usage rang: outdoor termination; indoor termination; straight through joint

Heat shrinkable cable accessories

Radiation cross-linked heat shrinkable polymer materials for power cable engineering indoor and outdoor protection, with excellent Proof Tracking Index and anti-pollution performance, in harsh environments to maintain long-term, safe and stable operation. Our heat-shrinkable cable accessories have been tested by the Wuhan High Voltage Research Institute, its performance reached the international advanced level of similar products. During the past 10 years, Millions of products sold throughout the country and Southeast Asia, North America has been safe and reliable operation

Features
Light weight. Reliable operation. Easy installation, waterproof design.
Under -50 ºC to 50 ºC temperature conditions, the service life is over 20 years
shrinkage ratio: Radial ≥ 50%, Axial≤ 10%.
shrinkage temperature: 120ºC~140ºC.
standards: GB / T12706, DL413, JB / T8144, IEEE Std. 48.IEEE Std. 404.VDE 0278.IEC 60502.ESI 09-13
Electrical stress control
Whether the cable accessories can operate reliably depends on whether the electric field stress at the end of the cable cutout can be properly evacuated. The material used in the heat shrinkage stress control tube has a volume resistivity and a dielectric constant that matches the electric field of the cable at the connection. The operation forms an impedance at the end of the cable shield to act as an electrical stress evacuation to ensure that the heat- Operational reliability and extended service life
Technical Data

property	Insulation tubing	stress control tubing	Conductive tubing	Sheathing	shed	Testing standards
Hardness(shore A)	≤90	≤85	≤90	≤95	≤90	GB/T241-2008
Tensile Strength	≥10.0	≥10.0	≥10.0	≥14.0	≥10.0	GB/T1040-2006
Elongation at break(%)	≥400	≥300	≥400	≥400	≥300	GB/T1040-2006
Tensile Strength after Aging (130ºC,168 hrs)	±20	±20	±20	±20	±20	GB/T714-2008
Water Absorption(%)	<0.1	-	-	<0.1	<0.1	GB/T103-2008
Volume R esistivity	≥1014	≥109~10	≤103	≤1013	≥1014	GB/T141-2006
Dielectric Strength(KV/mm)	≥20	-	-	≥20	≥20	GB/T1408-1999
Proof Tracking Index	1A3.5	-	-	-	1A 3.5	GB/T655-2003
Dielectric Constant	-	15~30	-	-	-	GB/T1409-2006

 
 
 

 


0.6/1KV Heat shrinkable cable accessories
L.V 5-cores heat shrinkable straight through joint kit
L.V 4-cores heat shrinkable termination kit
Use and characteristics
1KV heat shrinkable cable accessories products widely used 0.6 / 1KV cross-linked cable terminal and the middle of the continuous insulation treatment, according to the number of cable core can be divided into 1-core. 2-cores. 3-cores.4-cores. 5-cores and other cables to meet the different cross-section. With small size. Light weight. Reliable operation. Easy installation and so on
Performance and indicators

Pilot projects		standard requirement
Electrical performance	5min Power-Frequency withstand voltage test	8KV, No flash, no breakdown
	5h Power-Frequency withstand voltage test	7.2KV, No flash, no breakdown
Mechanical behavior	tensile strength	≥12MPa
	Elongation at break	≥300%

1KVL.V thermal cable terminal specifications

Applicable cable cross section		Applicable cable core number
NO	Section(mm2)	1-core	2-cores	3-cores	4-cores	5-cores
1	10~16	SY-1/1.0	SY-1/2.0	SY-1/3.0	SY-1/4.0	SY-1/5.0
2	25~50	SY-1/1.1	SY-1/2.1	SY-1/3.1	SY-1/4.1	SY-1/5.1
3	70~120	SY-1/1.2	SY-1/2.2	SY-1/3.2	SY-1/4.2	SY-1/5.2
4	150~240	SY-1/1.3	SY-1/2.3	SY-1/3.3	SY-1/4.3	SY-1/5.3
5	300~500	SY-1/1.4	SY-1/2.4	SY-1/3.4	SY-1/4.4	SY-1/5.4

1KVL.V heat shrinkable termination kit

Applicable cable cross section		Applicable cable core number
Serial number	Section(mm2)	1-core	2-cores	3-cores	4-cores	5-cores
1	10~16	jSY-1/1.0	jSY-1/2.0	jSY-1/3.0	jSY-1/4.0	jSY-1/5.0
2	25~50	jSY-1/1.1	jSY-1/2.1	jSY-1/3.1	jSY-1/4.1	jSY-1/5.1
3	70~120	jSY-1/1.2	jSY-1/2.2	jSY-1/3.2	jSY-1/4.2	jSY-1/5.2
4	150~240	jSY-1/1.3	jSY-1/2.3	jSY-1/3.3	jSY-1/4.3	jSY-1/5.3
5	300~500	jSY-1/1.4	jSY-1/2.4	jSY-1/3.4	jSY-1/4.4	jSY-1/5.4

Note: There are armored cables to use accessories package
1-lug 2-Cable core 3-filling gum 4-seal tubing 5-insulation tubing 6-Outdoor heat shrink tube 7-rainshed 8-stress control tubing 9-semi-conductive layer 10-copper screen 11-Three-hole skirt
12-outer jacket 13-copper braid 14-Cable clamp 15-Triangle pad cone 16-Constant force spring
Tips: Recommended heat shrink attachment with constant force spring fixed ground
Use and characteristics
Heat shrinkable medium voltage products are widely used in 6 ~ 35kv cross-linked cable terminal and the middle of the continuous insulation treatment. With small size. Light weight. Reliable operation. Easy installation and so on. According to user needs can be multi-core cable. Double ground structure or special requirements of the product design
Description of type
 S  -  /  .
                                                              Size of Conductor:"
                                                              "0":10-16mm2
                                              Size of Conductor  "1":20-50mm2
                                                              "2":70-120mm2
                                              Cable cores       "3":150-240mm2
                                                              "4":300-500mm2 
                             Voltage Grade:1.10.35KV             Cable cores:From
                                                              1C to 5C
                             Cable type:Y-Cross Linked Polyethylene  For example:
                                      Power Cable"XLPE";         "WSY-11/3.1":
                                      Z-Paper insulation Cable"PILC" 11KV"XLPE"cable
                             Heat shrinkable                      Heat-shrinkable
                                                            outdoor termination;
                             Usage rang: W-Outdoor termination;    three cores,Size of
                                       N-indoor termination;      Conductor is 25-50
                                       J-Straight through joint      mm2
 


Technical Data

NO	Property	require	Typical data
1	Power-Frequency withstand voltage test	39KV,5min	No flash, no breakdown
2	Partial discharge test	15KV,≤10pc	≤10pc
3	Impulse withstand	95kv, Positive and negative polarity of 10 times	No flash, no breakdown
4	Constant pressure load cycle voltage test(in the air)	22kv, The conductor was heated to (95-100) ° C for each cycle of 8 h, where 5 h was heated for 3 h for a total of 60 cycles	Assessed by subsequent tests
5	High temperature partial discharge test	15kv, ≤10pc	≤10pc
6	Ac withstand	22kv,15min	No flash, no breakdown
7	Outdoor terminal salt spray test	11kv,1000min	No flash, no breakdown
8	Indoor terminal wet test	11kv,300min	No flash, no breakdown

10KV  XPLE heat ahrinkable cable accessories

Applicable cable cross section		Outdoor termination kit		Indoor termination kit		Straight throught joint kit
NO	Size of conductor(mm2)	1-core	3-cores	1-core	3-cores	1-core	3-cores
1	25~50	WSY-10/1.1	WSY-10/3.1	NSY-10/1.1	NSY-10/3.1	JSY-10/1.1	JSY-10/3.1
2	70~120	WSY-10/1.2	WSY-10/3.2	NSY-10/1.2	NSY-10/3.2	JSY-10/1.2	JSY-10/3.2
3	150~240	WSY-10/1.3	WSY-10/3.3	NSY-10/1.3	NSY-10/3.3	JSY-10/1.3	JSY-10/3.3
4	300~400	WSY-10/1.4	WSY-10/3.4	NSY-10/1.4	NSY-10/3.4	JSY-10/1.4	JSY-10/3.4
5	500~630	WSY-10/1.5	WSY-10/3.5	NSY-10/1.5	NSY-10/3.5	JSY-10/1.5	JSY-10/3.5

Note: According to customer demand can choose double ground structure
20KV HEAT SHRINKABLE CABLE ACCESSORIES
Use and characteristics
This product is suitable for the voltage level of 12 / 20KV. 18 / 20KV, the nominal cross-section of 25 ~ 400mm2 cross-linked polyethylene insulation, ethylene-propylene rubber insulated single-core, three-core power cable indoor, outdoor terminals and intermediate joints, from the insulation, sealing, connection.
The electrical stress control of this product is parametric type, the use of stress tube. Products from the insulation tube, the semi-conductor tube, stress pipe, casing, branch sets, such as rainshed
10KV /20kv heat ahrinkable cable accessories

Applicable cable cross section		Outdoor termination kit		Indoor termination kit		Straight throught joint kit
NO	Size of conductor(mm2)	1-core	3-cores	1-core	3-cores	1-core	3-cores
1	25~50	WSY-20/1.1-12	WSY-20/3.1-12	NSY-20/1.1-12	NSY-20/3.1-12	JSY-20/1.1-12	JSY-20/3.1-12
2	70~120	WSY-20/1.2-12	WSY-20/3.2-12	NSY-20/1.2-12	NSY-20/3.2-12	JSY-20/1.2-12	JSY-20/3.2-12
3	150~240	WSY-20/1.3-12	WSY-20/3.3-12	NSY-20/1.3-12	NSY-20/3.3-12	JSY-20/1.3-12	JSY-20/3.3-12
4	300~400	WSY-20/1.4-12	WSY-20/3.4-12	NSY-20/1.4-12	NSY-20/3.4-12	JSY-20/1.4-12	JSY-20/3.4-12

 
Note: According to customer demand can choose double ground structure
18KV /20kv heat ahrinkable cable accessories

Applicable cable cross section		Outdoor termination kit		Indoor termination kit		Straight throught joint kit
NO	Size of conductor(mm2)	1-core	3-cores	1-core	3-cores	1-core	3-cores
1	25~50	WSY-20/1.1-18	WSY-20/3.1-18	NSY-20/1.1-18	NSY-20/3.1-18	JSY-20/1.1-18	JSY-20/3.1-18
2	70~120	WSY-20/1.2-18	WSY-20/3.2-18	NSY-20/1.2-18	NSY-20/3.2-18	JSY-20/1.2-18	JSY-20/3.2-18
3	150~240	WSY-20/1.3-18	WSY-20/3.3-18	NSY-20/1.3-18	NSY-20/3.3-18	JSY-20/1.3-18	JSY-20/3.3-18
4	300~400	WSY-20/1.4-18	WSY-20/3.4-18	NSY-20/1.4-18	NSY-20/3.4-18	JSY-20/1.4-18	JSY-20/3.4-18

 
Note: According to customer demand can choose double ground structure
35KV HEAT SHRINKABLE CABLE ACCESSORIES
Use and characteristics
Heat-shrinkable cable accessories are widely used in 35kv AC cable termination and intermediate connections for continuous insulation treatment. This series of products for 35kv grade different forms of cable.
With a small size, light weight, reliable operation, easy installation and so on. According to user needs can be multi-core cable, double ground structure or special requirements of the product design
technical Data

NO	Property	require	Typical data
1	Frequency withstand voltage test	117KV,5min	No flash, no breakdown
2	Partial discharge test	45KV,≤10pc	≤10pc
3	Impulse withstand	200kv, Positive and negative polarity of 10 times	No flash, no breakdown
4	Constant pressure load cycle voltage test(in the air)	65kv, The conductor was heated to (95-100) ° C for each cycle of 8 h, where 5 h was heated for 3 h for a total of 60 cycles	Assessed by subsequent tests
5	Ac withstand	104kv,4h	No flash, no breakdown

35kv heat ahrinkable cable accessories
 
 

Number of cable cores	Outdoor termination kit	Indoor termination kit	Straight throught joint kit	Applicable cable cross section(mm2)
1-core	WSY-35/1.1	NSY-35/1.1	JSY-35/1.1	50-120
	WSY-35/1.2	NSY-35/1.2	JSY-35/1.2	150-300
	WSY-35/1.3	NSY-35/1.3	JSY-35/1.3	400-500
3-cores	WSY-35/3.1	NSY-35/3.1	JSY-35/3.1	50-120
	WSY-35/3.2	NSY-35/3.2	JSY-35/3.2	150-300
	WSY-35/3.3	NSY-35/3.3	JSY-35/3.3	400-500

Note: According to customer demand can choose double ground structure